" "
" "
"* Configuration specs define screen/plot colors, plot resolution,"
"  etc.  FILE OUTPUT CONFIG defines format of ASCII files written to"
"  disk.  PRINTER CONFIG defines type (parallel/serial), port # and"
"  serial format.  These specs DO NOT affect engine power. (p 95)"
" "
"* The GRAPHICS DRIVE and DIRECTRY specs tell the program where to find"
"  the DOS program GRAPHICS.COM.  This program is necessary to print"
"  plots on your printer.  The PRINTER CODE identifies your type of"
"  printer.  Choices of printers are given by entering 'C' for this"
"  spec.  Try various PRINTER CODEs for best quality plots. (p 99-100)"
" "
"* Specs with an 'na' to their left are currently ignored by the"
"  program, example 'BKGD COLOR' ignored if 'MONO/COLOR'= M. (p 95)."
" "
"* <Esc> and/or <F1> are used to accept the current settings and 'back"
"  out' to the MAIN MENU."
" "
"* If you are new to this program, set BEGINNER HELP LEVEL to Y."
" "
" "
" "
" "
" "