" "
"* Two (2) types of plots are available:"
"    a)  Torque & HP vs RPM (specs on the left side of the screen)"
"    b)  Valve Lift vs Crank Degrees (specs on the right side)."
"  Highlight either PLOT CURRENT DATA or OVERPLOT BASELINE in the"
"  appropriate column and press <Enter> to produce the plot."
" "
"* Ctrl-B allows you to save the current Torque, HP and Valve Lift as"
"  the Baseline, for comparing to future calculations."
" " 
"* Enter values for specs by moving highlighted cursor to chosen spec"
"  and typing in the new value followed by <Enter>.  Program will warn"
"  you if value entered is outside normal limits."
" "
"* Specs with an 'na' to their left are currently ignored by the pro-"
"  gram, ex: MIN RPM ignored if AUTOSCALING = N. (p 104)"
" "
"* <Esc> is used to 'back out' to the CALCULATED PERFORMANCE screen."
" "
"* Press <F2> and enter 'I' for definitions of each spec."
" "
" "
" "
" "
" "
" "
" "
" "