"How to Build an Engine" " " "To build an engine in the computer, you first start with an existing" "engine. It is easiest to start with an engine close to the engine you" "want to build. For example, if you want to build a 351 Windsor Ford," "it is easiest to start with a 351 Windsor from the ENGINE LIBRARY." " " "To bring up the ENGINE LIBRARY, use the Ctrl-R command (press the " "key while holding the key) to Retrieve engines at the MAIN MENU." " " "If the LIBRARY does not have a 351W, you could start with a 302 Ford," "and change the STROKE from 3'' to 3.5''. Now you have a basic 351W." " " "To save this new 351W you just created into the ENGINE LIBRARY, use the" "Ctrl-S command. When saving it, you are asked if you want to save it" "under a new name. You could give it the new name of MY-351W. Now you" "have added a new engine to the ENGINE LIBRARY." " " "You can continue refining your engine by going through each spec to" "make sure it is close to the actual engine you are building." " " " " " " " "