"SUPERCHARGER INSTALLED (Y/N)     N"
" "
"na BOOST LIMIT, '' HG            20"
"na TOTAL BELT RATIO (C)          1.5"
" "
"USE THESE SPECS                  "
" "
" "
"1) The menu pictured above is an example of a 'window' type menu"
"   listing some typical supercharger specs.  For these smaller menus,"
"   the Command/Options Line is highlighted directly below the window."
"   For this example menu, you can press the <F1> key to return to the"
"   previous menu, <F2> to obtain HELP or <F3> to list examples of"
"   supercharger specs for specific superchargers."
" "
" "
"2) Specs which are NOT currently used by the program are marked 'na'"
"   which means 'not applicable'.  In this example, these supercharger"
"   specs are marked 'na' because the first spec says no supercharger"
"   is installed on the engine."
" "
" "
" "
" "
"3) Specs followed by a (C) can be calculated from other inputs or can"
"   be picked from a list of options in a CALCULATION MENU.  Simply"
"   press the C key and the <Enter> key for these specs to bring up the"
"   CALCULATION MENU.  Press <F2> for more help when in the CALCULATION"
"   MENU to explain how each particular menu is used."
" "
" "
" "
" "
" "
" "
" "
" "
" "
" "