"General HELP on Library Commands" 
" "
"* Use the arrow keys to highlight the engine file you want to Retrieve"
"  and press <Enter>.  You will first receive a message which says that"
"  you will loose any changes made to the CURRENT FILE unless you saved"
"  them with Ctrl-S or save them now. If you have made important changes"
"  to the CURRENT FILE that you want to save, answer S and these changes"
"  will be saved to either the existing CURRENT FILE or a new name."
"  Otherwise, answer A to abandon these changes and simply retrieve the"
"  new engine."
" "
"* To delete an engine, highlight the file to be deleted and then press"
"  <D> while holding the <Ctrl> key. (p 115)" 
" " 
"* To use an ENGINE ANALYZER v1.1 or 2.1 engine, press <V> while holding"
"  the <Ctrl> key and follow the instructions given. (p 117)"
" "
"* To create a new engine, start with an engine similar to the new"
"  engine.  Make changes to the specs to match the new engine.  Then at"
"  the MAIN MENU, use Ctrl-C to update the comments and Ctrl-S to save"
"  this engine under a New Name.  (p 115)" 
" " 
" " 
" " 
" " 
" "
" "