"------  VALVE FLOW & CAM CALCULATIONS  -------------------  --INT--  --EXH--"
"OVERLAP AREA, SQ IN*DEG"
"TOTAL AVG FLOW COEF"
"TOTAL EXH/INT %"
"LOBE AREA, INCH*DEG"
"LOBE SEPARATION, DEG"
"VLV AREA, DEG*SQ-IN"
" "
"LOBE CENTRLINS, DEG"
"------  GENERAL ENGINE CALCULATIONS  ---------------------------------------"
"DISPLACEMENT, cc"
"DISPLACEMENT, cu in"
"DYNAMIC COMP. RATIO"
"COMPRESSION RATIO"
"THEO. CRANK COMPRSSN,PSI"
"CLEARANCE VOLUME, ccs"
"CARB MINIMUM WOT RPM"
"EST IDLE VAC, ''Hg"
"  REC INERTIA LEN, IN"
"REC AREA, SQ IN/IN"
"  SPEC INERTIA LEN, IN"
"REC AREA, SQ IN/IN"
"  REC LEN, 2ND PULSE"
"REC AREA, SQ IN/IN"
"  REC LEN, 3RD PULSE"
"REC AREA, SQ IN/IN"
"  REC LEN, 1ST PULSE"
"REC AREA,300 FT/SEC"
"  REC LEN, 2ND PULSE"
"PRIMARY TUBE O.D."
"APPROX CAM FOR PEAKS ( based on current engine specs ):"
"  TQ PK, INT DUR @ .050"
"TQ PK, INT TAPPET LIFT"
"  TQ PK, EXH DUR @ .050"
"TQ PK, EXH TAPPET LIFT"
"  HP PK, INT DUR @ .050"
"HP PK, INT TAPPET LIFT"
"  HP PK, EXH DUR @ .050"
"HP PK, EXH TAPPET LIFT"
" "